#Asus pc link disconnects how to#
#Asus pc link disconnects update#
#Asus pc link disconnects driver#

Update the computer's BIOS/UEFI with the appropriate file from your system/motherboard manufacturer.

We also recommend running a DisplayLink Installation Cleaner first.

#Asus pc link disconnects driver#

You can find our latest Windows driver from DisplayLink download section

If the error still shows when you plug the device back, try updating the driver.

Unplug your DisplayLink device and restart you laptop.

To fix this error we recommend trying the following steps: There have been some instances of DisplayLink devices with a yellow '!' in device manager, and opening the properties shows that they have an error code 43.

#Asus pc link disconnects how to#

Or follow the steps from TenForums: How to Add or Remove 'USB 3 Link Power Management' from Power Options in Windows.Д©.

Select the USB selective suspend setting.

In the Power Options dialog that opens select USB settings.Select Change plan settings against your preferred power plan.Some USB 3.0 enabled PCs can exhibit issues which can be resolved by connecting your product through an external mains powered USB hub Try connecting your product through an external mains powered USB hub Try a USB 'Y' cable (if you are using a USB powered monitor product)Д®nsure you connect both ends of the 'Y' cable to USB ports on your PCД§. We have also been made aware of rare quality issues with selected USB ports on a laptop series.Д¦. Check if the same behaviour is observed with a different USB cable or USB portДЄs with other kinds of cable, USB cable quality can vary. Some USB 3.0 enabled PCs can exhibit issues on USB 3.0 ports but not on USB 2.0 portsДҐ. Check if the same behaviour is seen when connected to a USB 2.0 port on your PC (or if none is available with a USB 2.0 cable) Visit your PC manufacturer's website to see if there is a BIOS update available for your computer.ДЄlso check if USB 3.0 mode (if present) is enabled in your BIOSД¤. Check if you have the latest BIOS version installed on your PC If you have Windows 7 installed see thisВ article to obtain the latest USB 3.0 host controller driverДЈ. Check if you have the latest USB 3.0 host controller driver installed on your PC You can locate the latest version on our Driver DownloadsДў. Check if you have the latest DisplayLink software installed Check PCIe Active State Power Management (ASPM) settingsДЎ.Check for error codes in Device Manager.Try connecting your product through an external mains powered USB hub.Try a USB 'Y' cable (if you are using a USB powered monitor product).Check if the same behaviour is observed with a different USB cable or USB port.Check if the same behaviour is seen when connected to a USB 2.0 port on your PC (or if none is available with a USB 2.0 cable).Check if you have the latest BIOS version installed on your PC.Check if you have the latest USB 3.0 host controller driver installed on your PC.Check if you have the latest DisplayLink software installed.If this does not solve the issue, follow the steps below:

If it is loose, the monitor will be detected and then lost by the dock, causingВ displayВ reconfiguration. Firstly check that the video cable is fully plugged into the dock and the monitor. This can be caused by loose video cables or USB instability.

Or your DisplayLink display freezes or locks up, while directly connected screens, eg the built in laptop screen, continue to work.

Your attached monitor will repeatedly flash off and on again.

You repeatedly hear the device disconnect and reconnect chime.

Your USB video adapter, USB docking station or USB monitor constantly disconnects and reconnects, or freezes.